http://www.rg-racing.com/browsetype/grips/Yamaha/MT-07_(FZ-07)/en-gbCopyright: (C) R&G Racing, see http://www.rg-racing.com for further informationSKU: HG000122C
Awarded RiDE magazine Best buy award status. R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs. Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those really cold days, increase the heat setting (using the easy to use control box) to get warmth up to a toasty 60°C (140ºF) is only afew taps away! Includes fused, pre-terminated wiring harness for connection to your motorcycle battery or switched live circuit. Note: Maximum power consumption for these heated grips is 4.0 amps per pair (48 watts). For optimum performance of the grip we recommend installing them using R&G grip glue (available separately) and sealing the open bar ends the supplied plug ca

Click here to view this product

]]>http://www.rg-racing.com/browsetype/grips/Yamaha/MT-07_(FZ-07)/HG000122C/http://www.rg-racing.com/browsetype/grips/Yamaha/MT-07_(FZ-07)/HG000122C/SKU: HGMCPREM
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs. All new Premium Features: -Heat Setting Memory -Auto Cut-Out -Fully Waterproof -New Grip Design Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those really cold days, increase the heat setting (using the easy to use control box) to get warmth up to a toasty 60°C (140ºF) is only afew taps away! Includes fused, pre-terminated wiring harness for connection to your motorcycle battery or switched live circuit. Note: Maximum power consumption for these heated grips is 4.0 amps per pair (48 watts). For optimum performance of the grip we recommend installing them using R&G grip glue (availab

Click here to view this product

]]>http://www.rg-racing.com/browsetype/grips/Yamaha/MT-07_(FZ-07)/HGMCPREM/http://www.rg-racing.com/browsetype/grips/Yamaha/MT-07_(FZ-07)/HGMCPREM/SKU: GG0002
Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place. Ideally suited to be used when installed R&G Heated Grips.

Click here to view this product

]]>http://www.rg-racing.com/browsetype/grips/Yamaha/MT-07_(FZ-07)/GG0002/http://www.rg-racing.com/browsetype/grips/Yamaha/MT-07_(FZ-07)/GG0002/