Indicator and Taillight Re-Sequencing Modules for the BMW R1250 GS/GSA 2021-. Available in both Front, Rear and Combo Kits.
These “PLUG + PLAY” interface modules massively improve the effectiveness of the OEM multifunction indicators and taillight by re-sequencing their functionality. Providing a no nonsense, no confusion clear indication of the motorcycle riders intention to make a turn and adding improved clarity and effectiveness of the main rear taillight functions.
Designed for all BMW R1250 GS/A’s from 2021 onwards with the OEM multifunction indicator “package”. These innovative modules use microprocessor technology to work seamlessly with the bikes CANbus electronics system. Re-sequencing the output signals from the bike’s lighting controller to repurpose the functionality of the front and rear indicators and also the bike’s main taillight.
- The Front indicator modules when installed cancel out the “always on” low level amber day/nighttime running lights. The indicators activate as normal when required. Clearly and with no ambiguity.
- The Rear indicator modules function normally as both red running and brake lights until the indicator is activated. When an indicator is activated (on either side) the module cancels out both the running and brake lights leaving only the amber indicator light clearly visible on that side. There is no longer any confusion or ambiguity for following traffic of the rider’s intentions.
- The Rear taillight module reactivates* the missing main rear running light function adding needed conspicuity. This extra lighting is vital when competing to get noticed in today’s traffic conditions and complements the re-sequenced rear indicator functionality.
*(On the BMW R1250 GS/A 2021- some owners are unaware there is no longer a full-time rear running light function in their main brake light unit. There is only a brake function. Installation of this module re-activates the rear running light).