Shop By Vehicle / Ducati Setting the standard in crash protection and bolt-on accessories.

You're viewing All Products for Ducati - 848 (2011)

Showing 1-48 of 138 results

Crash Protectors - Aero Style for Ducati 848, 1098 and 1198(CP0196BL, CP0196WH)

These Aero Style crash protectors are suitable for the Ducati 848, 1098S and 1198 and feature our stylish, aerodynamic Aero Bobbin.R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin i...

£192.49 ex. VAT

Add To Basket

Fork Protectors(FP0060BK)

These fork protectors are suitable for the Ducati 848, 1098S, 1198S, & Streetfighter (1098) models help to eliminate damage to the front forks during a drop.

£36.66 ex. VAT

Add To Basket

Licence Plate Extension/Adapter Kit(LPK0003BK)

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your...

£11.66 ex. VAT

Add To Basket

Tail Tidy for Ducati 848 & 1098S (with R&G LED Micro Indicators included)(LP0041BK)

Tidy up your rear end with this R&G Tail Tidy/Licence Plate Holder!Suitable for the Ducati 848 & 1098S, this tail tidy incorporates our replacement tail tidy number plate light.

£102.49 ex. VAT

Add To Basket

Radiator Guards (2piece) for Ducati 848, 1098 and 1198 '07-(RAD0123BK, RAD0123RE)

Available in a black or red finishes to fit the Ducati 848/1098/1198 ('07- onwards). This 2 piece radiator guard is made from pressed aluminium and feature a neat, seamless frame (where applicable)....

£89.16 ex. VAT

Add To Basket

Titanium Radiator Guard Universal Mesh (16inches x 12inches)(RADUMRACINGTI)

Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.

£65.08 ex. VAT

Add To Basket

Eazi-Grip EVO Centre Tank Pads (EVOCENTREPAD)

We recommend using a black tank grip on a black or white tank. A clear grip on a black tank produces a slight ice-blue tone. The adhesive properties of a clear grip affect the appearance of a white ta...

£16.95 ex. VAT

Add To Basket

Eazi-Grip PRO Centre Tank Pads(PROCENTREPAD)

We recommend that on a black or a white tank, a black tank grip should be used. There is a slight ice blue tone that appears on a black tank when a clear grip is used. For a white tank, the adhesive p...

£16.95 ex. VAT

Add To Basket

Eazi-Grip Ducati 848/ 1098/ 1198 '07-16 - EVO(EVO204)

£36.99 ex. VAT

Add To Basket

Eazi-Grip Ducati 848/1098/1198 '07-16 - PRO(PRO204)

£36.99 ex. VAT

Add To Basket

Eazi-Grip Large Universal Tank Grip - PRO(PROLARGEUNI)

£31.99 ex. VAT

Add To Basket

Eazi-Grip Universal Ridged Tank Grips -PRO(PRORIDGEDUNI)

£22.99 ex. VAT

Add To Basket

Bar End Sliders for Renthal, LSL Bars, Ducati 848/Diavel, Monster 1200 & S '14-, KTM RC125/200 '14-(BE0023BK)

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars, Ducati 848 '08- / Ducati Diavel (2011-), Monster 1200 & S '14-, KTM RC125/200 '14-

£33.33 ex. VAT

Add To Basket

Titanium Sprocket Nuts M10X1.25 (5-piece set)(RGN01TI)

This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Titanium Sprocket Nuts go throug...

£29.16 ex. VAT

Add To Basket

Engine Case Covers for Ducati Multistrada 1200 '10-'14, Streetfighter (1098), 848, 848 Streetfighter, 1098, 1198, Hypermotard 821 / Hyperstrada 821/ '13-(ECC0085BK)

Left hand side water pump cover to fit the Ducati Multistrada 1200 '10-'14, Streetfighter (1098), 848, 848 Streetfighter, 1098, 1198, Hypermotard 821 / Hyperstrada 821/ '13- and many more.

£49.16 ex. VAT

Add To Basket

Engine Case Covers(ECC0013BK)

WET CLUTCH COVER - Right Hand Side for the Ducati 848, Hypermotard 796, MTS Multistrada 1100 '07-, Monster 1100 Evo and the ST3 motorbikes.

£76.66 ex. VAT

Add To Basket

Engine Case Cover Kit (2pc) for Ducati Multistrada 1200 '10-'14 & 848 '08-'13(KEC0029BK)

Suitable for the Ducati Multistrada 1200 and 1200S models '10-'14 & 848 '08-'13 Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike...

£113.33 ex. VAT

Add To Basket

Kaoko Throttle Stabilizer for Ducati 748/848/916/996/998/999/1098/1198, Streetfighter/S , Multistrada 1200/S '10-, Monster 1100 ABS '10-, SCRAMBLER; Monster 696 '13- & Desert Sled '18-. Including matching LHS BE in black finish. For Models with 16,8m(KA-DUC100)

Kaoko Throttle Stabilizer for Ducati 748/848/916/996/998/999/1098/1198, Streetfighter/S , Multistrada 1200/S '10-, Monster 1100 ABS '10-, SCRAMBLER; Monster 696 '13- & Desert Sled '18-.. Including mat...

£89.16 ex. VAT

Add To Basket

Kaoko Throttle Stabilizer for Ducati 848 EVO models ('08-); Ducati 1100 EVO models ('08-);Monster 1200/S ('14-), Monster 796 ABS ('10-), Diavel V4 '23- & Monster 950 (+) ('21-) (including matching left hand side Bar-End weight : black finish). For Mo(KA-DUC105)

Kaoko Throttle Stabilizer for Ducati 848 EVO models (2008-); Ducati 1100 EVO models (2008-);Monster 1200/S (2014-), Monster 796 ABS (2010-), Diavel V4 '23- (including matching left hand side Bar-End...

£89.16 ex. VAT

Add To Basket

Kaoko Throttle Stabilizer for Ducati 848 EVO models (2008-); Ducati 1100 EVO models (2008-);Monster 1200/S (2014-), Monster 796 ABS (2010-) (including matching left hand side Bar-End weight : black finish) With CRG Mirrors(KA-DUC105CRG)

Kaoko Throttle Stabilizer for Ducati 848 EVO models (2008-); Ducati 1100 EVO models (2008-);Monster 1200/S (2014-), Monster 796 ABS (2010-) (including matching left hand side Bar-End weight : black f...

£94.16 ex. VAT

Add To Basket

R&G Single Sided Workshop Paddock Stand (Left)(WSPS/LHS)

Discover the Workshop Paddock Stand that redefines durability and functionality, setting the standard for motorcycle enthusiasts and mechanics alike. Crafted with meticulous attention to detail, this...

£83.33 ex. VAT

Add To Basket

R&G Front Workshop Paddock Stand(WSPS/FRONT)

£58.33 ex. VAT

Add To Basket

R&G Workshop Paddock Stand Pin - 25.8mm/21.7mm(WSPS/PIN/H)

This pin kit is suitable for our R&G Workshop single sided swingarm paddock stands for bikes with a rear spindle diameter of 25.8mm/21.7mm (ID)

£24.99 ex. VAT

Add To Basket

Premium Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)(HGMCPREM)

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output...

£59.99 ex. VAT

Add To Basket

Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)(HG000122C)

Awarded RiDE magazine Best buy award status.

£41.66 ex. VAT

Add To Basket

R&G Brake Lever Guard - Universal Fit (13-21mm Expanding design)(BLG0001)

Our all-new version of the R&G Brake Lever Guard kit can be fitted to the brake and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm dia...

£42.79 ex. VAT

Add To Basket

Moulded Lever Guard - Universal Fit (13-21mm Expanding design)(MLG0001BK, MLG0001BL, MLG0001GR, MLG0001OR, MLG0001RE)

This R&G Moulded Lever Guard kit can be fitted to either the brake or clutch sides and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm...

£35.83 ex. VAT

Add To Basket

Single Sided Paddock Stand Pin - 21.8mm OD 25.80 STEPPED(PIN1)

This pin kit is suitable for our single sided swingarm paddock stands for bikes with a rear spindle diameter of 21.8mm (ID) 25.80 STEPPED

£24.16 ex. VAT

Add To Basket

Spindle Sliders(SS0006BK)

Spindle sliders for the rear wheel suitable for the Ducati 748, 848, 848 Streetfighter, 916, 996, 998, Hypermotard 796, Hypermotard 1100 & Monster S4RS '07- models.

£39.99 ex. VAT

Add To Basket

R&G Tank Traction Grip for Ducati 848,1098 and 1198 and Ducati 848/1098 Streetfighter models(EZRG211BL, EZRG211CL)

This Tank Traction Grip Kit has been specially designed for the Ducati 848,1098 and 1198 and 848 Streetfighter and 1098 Streetfighter models.

£31.66 ex. VAT

Add To Basket

R&G Micro LED Indicators (RG374BK)

R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.

£34.16 ex. VAT

Add To Basket

R&G LED Flasher Relay : Universal (2-pin)(RGRELAY001)

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.

£12.49 ex. VAT

Add To Basket

R&G LED Flasher Relay : Universal (3-pin)(RGRELAY002)

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.

£12.49 ex. VAT

Add To Basket

Micro Indicators - LED Type - Aero Style(RG372BK, RG372SI)

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, the...

£41.66 ex. VAT

Add To Basket

Micro LED Indicators - Resistors(RGR0002)

Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors...

£4.58 ex. VAT

Add To Basket

Micro Indicators - Resistors for Bulb indicators(RGR0001)

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors ca...

£4.58 ex. VAT

Add To Basket

Mirror Blanking Plates for Ducati 848,1098 and 1198(MBP0009BK)

Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!

£36.66 ex. VAT

Add To Basket

Under Body Frame Sliders(UCP0003BL)

Ducati 1098/1198 and 848 under body frame sliders

£69.16 ex. VAT

Add To Basket

Superbike Outdoor Cover (BC0006)

The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features...

£45.83 ex. VAT

Add To Basket

M8 Elevation Paddock Stand Bobbins(ITBO002BK, ITBO002SI, ITBO002TI)

These anodised aluminium paddock stand bobbins are sized M8 and are suitable for most Ducati, Honda, Suzuki, Triumph and Kawasaki models.

£24.99 ex. VAT

Add To Basket

R&G Rim Tape(RIMTAPE0002)

Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!

£9.16 ex. VAT

Add To Basket

16-Piece Modular Motorcycle Rim Tape(RIMTAPE0001BLUE, RIMTAPE0001DKBLUE, RIMTAPE0001GR, RIMTAPE0001OR, RIMTAPE0001RE, RIMTAPE0001WH, RIMTAPE0001YE)

R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!

£9.16 ex. VAT

Add To Basket

Modular Centre Tank Pad(TKPAD2BK)

From sportsbikes to cruisers, R&G Tank Pads help protect your fuel tank, in style, from unwanted marks, as well as scratches from zippers/buckles and general wear and tearr with our newly developed 3...

£19.99 ex. VAT

Add To Basket

Clutch/Brake Reservoir Protector (Booty)(CRP001, CRP001OR)

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

£5.83 ex. VAT

Add To Basket

R&G Deluxe Helmet Bag(DHB0001BK)

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

£23.33 ex. VAT

Add To Basket

Straps - Handlebar Top Straps(ST0001BL)

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes...

£16.66 ex. VAT

Add To Basket

Straps - Ratchet Straps(ST0699)

R&G Ratchet straps are easy to use due to a one-handed fastening/quick-release mechanism. It makes tightening and loosening the strap a cinch, which is great for those times when you just need to get...

£11.66 ex. VAT

Add To Basket

Radiator Guard Universal Mesh (16inches x 12inches)(RADUM01BK, RADUM01GR, RADUM01TI)

Our Universal mesh flat sheets (sized 16" x 12") available in black, titanium or green finishes to fit almost any radiator size or fill any fairing opening on your bike.

£24.07 ex. VAT

Add To Basket

Showing 1-48 of 138 results

Filter Your Results

Tell us what Make, Model & Year of vehicle you have and we'll show you everything we have that fits.

Add to garage

Update Results

SHOP R&G

ABOUT

SETTING THE STANDARD IN CRASH PROTECTION AND BOLT-ON ACCESSORIES

Here at R&G, we are known for our wide range of crash protection and styling accessories, but we are also a distributor for many of the world’s leading motorcycle brands.

Already supporting racers around the world, alongside being an Official Partner of the Bennetts British Superbike Championship and an Official Sponsor of the MotoAmerica series.

SAFE & SECURE