Shop By Vehicle / Ducati Setting the standard in crash protection and bolt-on accessories.


You're viewing All Products for Ducati - 1198S (2011)

Showing 1-48 of 139 results


Crash Protectors - Aero Style for Ducati 848, 1098 and 1198(CP0196BL, CP0196WH)
These Aero Style crash protectors are suitable for the Ducati 848, 1098S and 1198 and feature our stylish, aerodynamic Aero Bobbin.R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin i...
£192.49 ex. VAT
Fork Protectors(FP0060BK)
These fork protectors are suitable for the Ducati 848, 1098S, 1198S, & Streetfighter (1098) models help to eliminate damage to the front forks during a drop.
£36.66 ex. VAT
Licence Plate Extension/Adapter Kit(LPK0003BK)
Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your...
£11.66 ex. VAT
Tail Tidy for Ducati 848 & 1098S (with R&G LED Micro Indicators included)(LP0041BK)
Tidy up your rear end with this R&G Tail Tidy/Licence Plate Holder!Suitable for the Ducati 848 & 1098S, this tail tidy incorporates our replacement tail tidy number plate light.
£102.49 ex. VAT
Radiator Guards (2piece) for Ducati 848, 1098 and 1198 '07-(RAD0123BK)
Available in a black or red finishes to fit the Ducati 848/1098/1198 ('07- onwards). This 2 piece radiator guard is made from pressed aluminium and feature a neat, seamless frame (where applicable)....
£89.16 ex. VAT
Titanium Radiator Guard Universal Mesh (16inches x 12inches)(RADUMRACINGTI)
Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.
£65.08 ex. VAT
Eazi-Grip EVO Centre Tank Pads (EVOCENTREPAD)
We recommend using a black tank grip on a black or white tank. A clear grip on a black tank produces a slight ice-blue tone. The adhesive properties of a clear grip affect the appearance of a white ta...
£16.95 ex. VAT
Eazi-Grip PRO Centre Tank Pads(PROCENTREPAD)
We recommend that on a black or a white tank, a black tank grip should be used. There is a slight ice blue tone that appears on a black tank when a clear grip is used. For a white tank, the adhesive p...
£16.95 ex. VAT
Eazi-Grip Ducati 848/ 1098/ 1198 '07-16 - EVO(EVO204)
We recommend that on a black or a white tank, a black tank grip should be used. There is a slight ice blue tone that appears on a black tank when a clear grip is used. For a white tank, the adhesive p...
£36.99 ex. VAT
Eazi-Grip Ducati 848/1098/1198 '07-16 - PRO(PRO204)
We recommend that on a black or a white tank, a black tank grip should be used. There is a slight ice blue tone that appears on a black tank when a clear grip is used. For a white tank, the adhesive p...
£36.99 ex. VAT
Eazi-Grip Large Universal Tank Grip - PRO(PROLARGEUNI)
We recommend that on a black or a white tank, a black tank grip should be used. There is a slight ice blue tone that appears on a black tank when a clear grip is used. For a white tank, the adhesive p...
£31.99 ex. VAT
Eazi-Grip Universal Ridged Tank Grips -PRO(PRORIDGEDUNI)
We recommend that on a black or a white tank, a black tank grip should be used. There is a slight ice blue tone that appears on a black tank when a clear grip is used. For a white tank, the adhesive p...
£22.99 ex. VAT
Bar End Sliders for Ducati 899/1199 Panigale Models(BE0018BK)
These bar ends are suitable for a range of Benelli and Ducati models and they will also fit Vortex bars. Click 'more info' to view more specific details.
£34.99 ex. VAT
Titanium Sprocket Nuts M10x1.00 (6-piece set)(RGN02)
This 6-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go...
£33.33 ex. VAT
Engine Case Covers for Ducati Multistrada 1200 '10-'14, Streetfighter (1098), 848, 848 Streetfighter, 1098, 1198, Hypermotard 821 / Hyperstrada 821/ '13-(ECC0085BK)
Left hand side water pump cover to fit the Ducati Multistrada 1200 '10-'14, Streetfighter (1098), 848, 848 Streetfighter, 1098, 1198, Hypermotard 821 / Hyperstrada 821/ '13- and many more.
£49.16 ex. VAT
Engine Case Covers(ECC0012BK)
Ducati DRY CLUTCH COVER - Right Hand Side.
£67.49 ex. VAT
Engine Case Cover Kit (2pc) for Ducati 1098 and 1198(KEC0007BK)
Suitable for the Ducati 1098 and 1198Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought t...
£104.16 ex. VAT
Kaoko Throttle Stabilizer for Ducati 748/848/916/996/998/999/1098/1198, Streetfighter/S , Multistrada 1200/S '10-, Monster 1100 ABS '10-, SCRAMBLER; Monster 696 '13- & Desert Sled '18-. Including matching LHS BE in black finish. For Models with 16,8m(KA-DUC100)
Kaoko Throttle Stabilizer for Ducati 748/848/916/996/998/999/1098/1198, Streetfighter/S , Multistrada 1200/S '10-, Monster 1100 ABS '10-, SCRAMBLER; Monster 696 '13- & Desert Sled '18-.. Including mat...
£89.16 ex. VAT
R&G Single Sided Workshop Paddock Stand (Left)(WSPS/LHS)
Discover the Workshop Paddock Stand that redefines durability and functionality, setting the standard for motorcycle enthusiasts and mechanics alike. Crafted with meticulous attention to detail, this...
£83.33 ex. VAT
R&G Front Workshop Paddock Stand(WSPS/FRONT)
Discover the Workshop Paddock Stand that redefines durability and functionality, setting the standard for motorcycle enthusiasts and mechanics alike. Crafted with meticulous attention to detail, this...
£58.33 ex. VAT
R&G Workshop Paddock Stand Pin - 40.7mm(WSPS/PIN/D)
This pin kit is suitable for our R&G Workshop single sided swingarm paddock stands for bikes with a rear spindle diameter of 40.7mm (ID)
£24.99 ex. VAT
Premium Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)(HGMCPREM)
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output...
£59.99 ex. VAT
Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)(HG000122C)
Awarded RiDE magazine Best buy award status.
£41.66 ex. VAT
Heated Grip Glue(GG0002)
Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.
£4.25 ex. VAT
R&G Brake Lever Guard - Universal Fit (13-21mm Expanding design)(BLG0001)
Our all-new version of the R&G Brake Lever Guard kit can be fitted to the brake and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm dia...
£42.79 ex. VAT
Moulded Lever Guard - Universal Fit (13-21mm Expanding design)(MLG0001BK, MLG0001BL, MLG0001GR, MLG0001OR, MLG0001RE)
This R&G Moulded Lever Guard kit can be fitted to either the brake or clutch sides and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm...
£35.83 ex. VAT
Single Sided Paddock Stand Pin - 40.6mm O/D(PIN2)
This pin kit is suitable for our single sided swingarm paddock stands for bikes with a rear spindle diameter of 40.6mm O/D
£41.66 ex. VAT
Single Sided Paddock Stand Pin - 42.0mm OD(PIN3)
This pin kit is suitable for our single sided swingarm paddock stands for bikes with a rear spindle diameter of 42.0mm (ID)
£38.33 ex. VAT
Spindle Sliders(SS0018BK)
Providing both crash protection to the rear components, protecting the swingarm and components, like the brakes and drivetrain in the event of a crash or drop but also functioning as paddock stand bob...
£37.49 ex. VAT
R&G Tank Traction Grip for Ducati 848,1098 and 1198 and Ducati 848/1098 Streetfighter models(EZRG211BL, EZRG211CL)
This Tank Traction Grip Kit has been specially designed for the Ducati 848,1098 and 1198 and 848 Streetfighter and 1098 Streetfighter models.
£31.66 ex. VAT
Measure your own Shocktube ®(Measure Your Own)
The Shocktube® is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
- Dont forget to include your shock measurements in the email! -
£21.24 ex. VAT
Exhaust Protector (Yoshimura R-77)(EP0011BK)
Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly...
£45.83 ex. VAT
Exhaust Protector (Scorpion Serket Exhaust)(EP0012BK)
Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly...
£45.83 ex. VAT
R&G Micro LED Indicators (RG374BK)
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.
£34.16 ex. VAT
R&G LED Flasher Relay : Universal (2-pin)(RGRELAY001)
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
£12.49 ex. VAT
R&G LED Flasher Relay : Universal (3-pin)(RGRELAY002)
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
£12.49 ex. VAT
Micro Indicators - LED Type - Aero Style(RG372BK, RG372SI)
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, the...
£41.66 ex. VAT
Micro LED Indicators - Resistors(RGR0002)
Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors...
£4.58 ex. VAT
Micro Indicators - Resistors for Bulb indicators(RGR0001)
Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors ca...
£4.58 ex. VAT
Mirror Blanking Plates for Ducati 848,1098 and 1198(MBP0009BK)
Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!
£36.66 ex. VAT
Dust Cover for Superbike/Street Motorcycles(DC00BKSI, DC00REWH)
These covers are breathable, soft and elasticated. They can also be spun dry.
£27.49 ex. VAT
Superbike Outdoor Cover (BC0006)
The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features...
£45.83 ex. VAT
M8 Elevation Paddock Stand Bobbins(ITBO002BK, ITBO002SI, ITBO002TI)
These anodised aluminium paddock stand bobbins are sized M8 and are suitable for most Ducati, Honda, Suzuki, Triumph and Kawasaki models.
£24.99 ex. VAT
R&G Rim Tape(RIMTAPE0002)
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!
£9.16 ex. VAT
16-Piece Modular Motorcycle Rim Tape(RIMTAPE0001BLUE, RIMTAPE0001DKBLUE, RIMTAPE0001GR, RIMTAPE0001OR, RIMTAPE0001RE, RIMTAPE0001WH, RIMTAPE0001YE)
R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!
£9.16 ex. VAT
Modular Centre Tank Pad(TKPAD2BK)
From sportsbikes to cruisers, R&G Tank Pads help protect your fuel tank, in style, from unwanted marks, as well as scratches from zippers/buckles and general wear and tearr with our newly developed 3...
£19.99 ex. VAT
Clutch/Brake Reservoir Protector (Booty)(CRP001, CRP001OR)
Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!
£5.83 ex. VAT
R&G Deluxe Helmet Bag(DHB0001BK)
Take care of your helmet with our R&G Racing Deluxe Helmet Bag!Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.
£23.33 ex. VAT

Showing 1-48 of 139 results

Filter Your Results

Tell us what Make, Model & Year of vehicle you have and we'll show you everything we have that fits.

Our Terms of use have changed

Please review and agree to continue to use the R&G website.

AGREE AND CONTINUE